How to Bytemark

Using the console shell

Once you’ve connected the display should look something like this:

EXample console connection

Note that usually your terminal size will end up 2 lines short because of the status lines at the bottom. So if you run editors or other full-screen applications and want to avoid the odd bit of corruption, you may want to expand your terminal by two lines to compensate.

The serial line will usually show a login prompt. You will also see kernel messages printed here; this is where to look for messages indicating disc failure or excessive network activity.

If you don’t see a login prompt, you may need to press return a couple of times.

If the server is really wedged, you can use the kernel “system request” facility to cause a reboot. To send a system request over the serial line, you send a break (press Ctrl+p then press b), followed quickly by one of the Sysrq letters: common ones are s for synchronize discs, u for unmount discs and b to force a reboot. Others are documented in the kernel Documentation/sysrq.txt file.

Key bindings

The serial console only shows you the serial console of your machine. There are other functions available which you can access using their key bindings (these do not apply to Cloud Servers which present all their facilities through the control panel).

Power cycling your machine

If your machine is really stuck and you can do nothing else with it then we’d suggest power cycling it. This is not clean and is essentially the same as pulling the plug on your server with no warning.

To power cycle your machine press Ctrl+p s and confirm your decision. The machine should then reboot, and after a few seconds you’ll be able to see the serial console output our boot loader messages. The sequence Ctrl+p r (long power cycle) is similar except this allows the power to be disconnected for up to 60 seconds; it’s useful with some motherboards that seem to have sufficient capacitance to prevent the simple power cycle from working.

Booting setup

You might want to read more about our network boot environment if you want to rescue or reinstall your host from scratch.

Bytemark Cloud used to be called "BigV"—nothing has changed except the name! We’re hiring! Please visit careers.bytemark.co.uk to find out more.